BRISK STEEL Hoobkas tuaj yeem muab thiab tsim EN 10210 S460NH hollow seem
siv rau tshav dav hlau, chaw nres tsheb ciav hlau thiab choj kev tsim kho
| Qib: | S460 NH | ||
| Tus lej: | 1.8953 | ||
| Kev faib tawm: | Cov qauv hlau | ||
| Txheem: |
|
||
| Qib sib npaug: | Tsis muaj ntaub ntawv |
Cov tshuaj muaj pes tsawg leeg ntawm cov hlau S460NH (1.8953): EN 10210-1-2006
| CEV <0.53 / 0.55 rau thickness 16 / 65 mm |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu |
| max 0.22 | max 0.6 hli | 1 - 1.7 | max 0.8 hli | max 0.035 Nws | max 0.03 Nws | max 0.3 hli | max 0.1 hli | max 0.2 hli | max 0.025 | max 0.05 Nws | max 0.03 Nws | max 0.02 Nws | max 0.7 hli |
Mechanical zog ntawm steel S460NH (1.8953)
| Nominal thickness (hli): | rau 65 |
| Rm- Tensile zog (MPa) | 540-720 |
| Nominal thickness (hli): | rau 16 | 16 - 40 | 40 - 65 |
| ReH- Tsawg tshaj tawm lub zog (MPa) | 460 | 440 | 430 |
| KV- Lub zog cuam tshuam (J) | -20 degree 40 |
| Nominal thickness (hli): | rau 65 |
| A- Min. elongation ntawm tawg (%) longitud., | 17 |
| Nominal thickness (hli): | rau 65 |
| A- Min. elongation ntawm pob txha (%) transverse, | 15 |
Mechanical zog
| ReH | Yam tsawg kawg nkaus yield zog / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile zog / Zugfestigkeit / Resistance a la traction |
| A | Tsawg kawg elongation / Mindestwert der Bruchdehnung / Allongement tsawg |
| J | Kev ntsuas qhov cuam tshuam / Kerbschlagbiegeversuch / Essai de flexion par choc |
Kev kho cua sov
|
|
Cim npe nrov: en 10210 s460nh square hollow seem, Tuam Tshoj en 10210 s460nh square hollow seem manufacturers, lwm tus neeg, Hoobkas
